|
Recent Publications Li, Q., Kim, K.-S., 2008. Micromechanics of friction: Effects of nanometre-scale roughness. Proceedings of the Royal Society A 464(2093), 1319-1343. Jay, G.D., Torres, J. R., Kim, K.-S., et al. 2008. Association between friction and wear in diathrodial joints lacking lubricin. Arthritis and Rheumatism 56(11), 3662-3669. Nicola, L., Bower, A.F., Kim, K-S., Needleman, A. Van der Giessen, E., Surface versus bulk nucleation of dislocations during contact. Journal of the Mechanics and Physics of Solids, 55, 1120-1144, 2007. B.C.P. Burke, S. O. Kim and K.-S. Kim, ˇ°Inverse problem of residual stresses solved by partial polar decomposition of a finite element stiffness matrixˇ± Int. J. Solids Struct. 44, 2010-2020, 2007. S. T. Choi and K.-S. Kim, ˇ°Nano-scale planar field projection of atomic decohesion and slip in crystalline solids, Part I: Formulation for a crack-tip cohesive zone,ˇ± Phil. Mag., 87(12), 2007. K.-S. Kim, ˇ°"Nano and micro mechanical measurement of interaction forces between solid surfaces" Key Engineering Materials, (2006), in press. H.H. Yu, P. Shrotriya, Y.F. Gao and K.-S. Kim, ˇ°Micro-plasticity of surface steps under adhesive contact. Part I. Surface yielding controlled by single-dislocation nucleation,ˇ± J. Mech. Phys. Solids, 55, 489-516, 2007. J. Wang, J. Lian, J. R. Greer, W. D. Nix, K.-S. Kim, ˇ°Size Effect in Contact Compression of Nano and Microscale Pyramid Structures,ˇ± Acta Materialia, 54 (15) 3973-3982, 2006.Q. Li, K.-S. Kim and A. Rydberg, ˇ°Lateral Force Calibration of an AFM with a Diamagnetic-Levitation Spring System,ˇ± Review of Scientific instruments, Vol 77, No 6, #065105 (2006)J. Wang, P. Shrotriya and K.-S. Kim, ˇ°Surface Residual Stress Measurement using Curvature Interferometry,ˇ± Experimental Mechanics, Vol. 46, pp. 39¨C46. (2006).J. R. Torres, G. D. Jay, M. L. Warman and K.-S. Kim, ˇ°Scale Bridging Model of Adhesive Force Reduction and Molecular Aggregation on Contacts Coated by Lubricin,ˇ± Orthopedic Research Society Transactions, Vol. 30, 0898, (2005). Y.F. Gao, A.F. Bower, K.-S. Kim, L. Lev and Y.T. Cheng, ˇ°The behavior of an elastic¨Cperfectly plastic sinusoidal surface under contact loading,ˇ± Wear (2005), Available online 24 October 2005.Michael E. Kassner, Kyung-Suk Kim, et al., ˇ°New directions in Mechanics,ˇ± Mechnaics of Materials, 37 (2005) pp231-259. Choi, S. T. and Kim K.-S., "Nano-scale planar ¨¦eld projection of atomistic decohesion of crystalline solids," ICTAM Proceedings, Warsaw, Poland, 2004. Y. F. Gao, A. F. Bower and K.-S. Kim, "Some Issues of Rough Surface Contact Plasticity at Micro-and Nano-Scales," MRS Proceedings, 2004. Shenoy, V.B. and Kim, K.-S. "Disorder effects in dynamic fragmentation of brittle solids," J. Mech. Phys. Solids, Vol 51, No. 11-12, pp2023-2035, 2003. Hong, S. and Kim, K.-S., "Extraction of cohesive zone laws from elastic far fields of a cohesive crack tip: a field projection method, J. Mech. Phys. Solids, Vol: 51, No. 7, pp. 1267-1286, 2003. Wang, J., Ward, D., Curtin, W.A. and Kim, K.-S. "Contact Compression of Self-assembled Nano- and Micro-scale Pyramid Structures on Au (100) Surface," MRS Proceedings, Vol. 795, L8.51, Boston, 2003. Yu, H., Shrotriya, P., Wang, J. and Kim, K.-S. "Dislocation nucleation and segregation in nano-scale contact of stepped surfaces," MRS Proceedings, Vol. 795, U7.9, Boston, 2003. Wang, J., Shrotriya, P., Yu, H. and Kim, K.-S. "Experimental measurements of surface residual stresses caused by nano-scale contact of rough surfaces," MRS Proceedings, Vol. 795, U9.9, Boston, 2003. Kim, K.-S, Wang, J. and Shrotriya, P., "Absolute and real-time curvature sensor insensitive to tilt and vibration," Patent Disclosure, Brown University, 4/21/2003. U.S. Patent filed 2003. Kim, K.-S., "Measurement of microscopic residual stress based on the evolution of surface roughness during shallow chemical etching," Proceedings of IUTAM, Abisko, Sweden, 2002. Kim, K.-S., "Scale bridging in dislocation based multi-scale modeling," Proceedings of NASA: multi-scale modeling, Langley, 2002. Yu, H., Kim, K.-S., and Cheng, Y. T., "Strength of surface nano-crystalline layers," Contemporary Research in Theoretical and Applied Mechanics, Ed. R.C. Batra and E.G. Henneke, p.465, 2002. Benzerga, A. A., Hong, S. S., Kim, K.-S., Needleman, A. and Van der Giessen, E., Bastawros, A.F., Kim, K.-S., "Electric-current induced crack growth in thin films: Experimental Kim, K.-S. and Hurtado, J. A., "Length-Scale Effects in Nano- and Micro-Mechanics of Solids," Key Engineering Materials, Vol. 183, pp.1-8, 2000. Kim, K.-S., "Atomic inter-planar responses and frictional behavior of a single-asperity contact," invited paper, Bulletin of the American Physical Society, Vol.45, No.1, p249, 2000. Bastawros, A.-F. and Kim, K.-S., ``Experimental Analysis of Near-Crack-Tip Plastic Flow and Deformation Characteristics (I): Polycrystalline Aluminum," J. Mech. Phys. Solids, Vol: 48, No. 1, pp. 67-98, 2000. Im, S. and Kim, K.-S., ``An application of two-state M-integral for computing the intensity of the singular near-tip field for a generic wedge," J. Mech. Phys. Solids, Vol: 48, No. 1, pp. 129-151, 2000. Kim,K.-S., Hurtado,J.A. and Tan,H., "Evolution of surface-roughness spectrum caused by stress in nanometer-scale chemical etching," Physical Review Letters, Vol. 83, No. 19, pp. 3872-3875, 1999. Andrews, E. A. and Kim, K.-S., " Threshold conditions for dynamic fragmentation of glass particles," Mechanics of Materials, Vol. 31, No. 11, pp. 689-703, 1999 Hurtado, J. A. and Kim, K.-S., ``Scale effects in friction of single-asperity contacts: Part I; from concurrent slip to single-dislocation-assisted slip," Proc. R. Soc. London. A, Vol. 455, pp. 3363-3384, 1999 Hurtado, J. A. and Kim, K.-S. ``Scale effects in friction of single-asperity contacts: Part II; Multiple-dislocation-cooperated slip," Proc. R. Soc. London. A, Vol. 455, pp. 3385-3400, 1999 Kim, K.-S., "Scale effects in adhesive-contact friction," Extended Abstracts, 1999 MRS Workshop Series; Tribology on the 300th Anniversary of Amontons' Law, 1999. Kim, K. -S., McMeeking, R. M. and Johnson, K. L., ``Adhesion, Slip, Cohesive Zones and Energy Fluxes for Elastic Spheres in Contact," J. Mech. Phys. Solids, Vol. 46, No. 2, pp. 243-266, 1998 Andrews, E. A. and Kim, K.-S. ``Threshold Conditions for Dynamic Fragmentation of Ceramic Particles," Mechanics of Materials, Vol. 29, pp. 161-180, 1998 Bastawros, A.-F. and Kim, K.-S., ``Experimental study on electric-current induced damage evolution at the crack tip in thin film conductors." Journal of Electronic Packaging, Vol. 120, No. 4. pp. 354-359, 1998 (1999 Best JEP Paper Award from ASME). Hurtado, J. A. and Kim, K.-S., ``Transitions of shear resistance in a single-asperity contact," Fracture and Ductile vs. Brittle Behavior, MRS Proceedings, Vol. 539, pp. 81 -92, 1998 Bastawros, A.-F. and Kim, K.-S. ``Experimental analysis of deformation induced microstructure near a crack tip in a hardened copper crystal," Fracture and Ductile vs. Brittle Behavior, MRS Proceedings, Vol. 539, pp. 251 -256, 1998 Book Edited : Fracture and Ductile vs. Brittle Behavior, - Theory, Modelling and Experiment, MRS Proceedings, Vol. 539, Edited by G. E. Beltz, R. L. Blumberg Selinger,
Some Selected Publications prior to 1998 Kim, K. -S., McMeeking, R. M. and Johnson, K. L., ``Adhesion, Slip, Cohesive Zones and Energy Fluxes for Elastic Spheres in Contact," J. Mech. Phys. Solids, Vol. 46, No. 2, pp. 243-266, 1998 Bastawros, A.-F. and Kim, K.-S., ``The role of electric-current induced heating in damage evolution at the crack tip in thin films", Application of Fracture Mechanics in Electronic packaging, EEP-Vol. 13, pp 1-12, 1997 Tsai, K.-H. and Kim, K. -S., ``Micromechanics of Fiber Pull-Out," J. Mech. Phys. Solids, Vol. 44, No. 7, pp. 1147-1177, 1996 Rice, J. R., Ben-Zion, Y., Kim, K.-S., ``Three-Dimensional Perturbation Solution for a Dynamic Planar Crack Moving Unsteadily in a Model Elastic Solid," J. Mech. Phys. Solids, Vol. 42, No. 5, pp. 813-843, 1994/ in place of 1995 Shield, T. W. and Kim, K.-S. ``Experimental Measurement of the Near Tip Strain Field in an Iron-Silicon Crystal," J. Mech. Phys. Solids, Vol. 42, No. 5, pp. 845-873, 1994. Yang, M. and Kim, K. -S., ``Interface fracture analysis of joints with a ductile interlayer,'' Int. J. Choi, H. C. and Kim, K. -S., ``Analysis of the spontaneous interfacial decohesion of a thin surface film," J. Mech. Phys. Solids, Vol. 40, No. 1, pp. 75-103, 1992. Tsai, T. H., Kim, K.-S. and Morse, T. F., ``General Aravas, N., Kim, K.-S. and Leckie, F.A., ``On the stored energy of cold work," J. of Engineering Materials and Technology, Vol. 112, No. 4, pp 465 - 470, 1990 Kim, J., Kim, K.-S. and Kim, Y.H., ``Mechanical effect of peel adhesion test," J. of Adhesion Science and Technology, Vol. 3, No. 3, pp. 175 - 187, 1989 Kim, K.-S. and Aravas, N., ``Elastoplastic analysis of the peel test," Int. J. Solids and Structures, Vol. 24, No. 4, pp. 417-435, 1988. Kim, K.-S., Dickerson, K.L. and Knauss, W.G., ``Viscoelastic behavior of opto-mechanical properties and its application to viscoelastic fracture studies," Int. J. of Fracture, Vol. 32, No. 4, pp. 265 -283, 1987 Kamath, S.M. and Kim, K.-S., ``Coherent light shadow spot at a crack under Mode-I loading," Experimental Mech., Vol. 26, No. 4, pp. 386 - 393, 1986 Kim, K.-S., ``Dynamic fracture under normal impact loading of the crack faces," J. Appl. Mech., Vol. 50, No. 3, pp 585-592, September 1985 Kim, K.-S. and Clifton, R.J., ``Dislocation motion in MgO crystals under plate impact," J. of Material Science, Vol. 19, pp. 1428-1438, 1984 Kim, K.-S., Clifton, R.J., ``Pressure shear impact of 6061-T6 aluminum," J. Appl. Mech., Vol. 47, No. 1, pp. 11-16, 1980. Kim, K.-S., Clifton, R.J. and Kumar, P., ``A combined normal and transverse displacement interferometer with an application to impact of Y-cut quartz," J. of Appl. Phys.,Vol 48, No. 10, pp. 4132-4139, 1977.
|
|
Publications |
